Investment Casting Parts Products
Typically used with metals with a high melting point like steel. Although aluminum can be used in this process, die casting may be a better alternative.
Material: Carbon steel, Low alloy steel, Stainless steel,
Nickel and Cobalt alloys, Heat resistant alloys, Aluminum, Brass, Copper, CuVerro antibacterial copper, Bronze
0.7 oz. – 22 lbs.
Up to 15 in long
Wall thickness: 0.04– 2 in
ADVANTAGES
Can be used for small or very large parts.
Good surface finish
Good dimensional accuracy
Can make intricate parts
Can use most metals
No flash or parting line

supplier of investment casting wax casting in china
DISADVANTAGES
High unit cost especially for small quantity
Long lead-time
Limited on size and depth for small holes.
Vacuum heat treatment, passivation, high pressure washing,
ISO 9001
ISO 14001
MOST COMMONLY USED ALLOYS
The most common alloys are listed below. Other alloys are available upon request. Specific material chemistry and mechanical specifications will be available upon request.
Carbon Steel
Low Alloy Steel
300 Series Stainless Steel
400 Series Stainless Steel
Precipitation Hardened Stainless Steel
Tool Steel
Nickel Base Alloy
Cobalt Base Alloy
Aluminum Alloy
INVESTMENT CASTING: TOLERANCE CAPABILITIES
Investment castings are designed to minimize the cost of producing close tolerance parts.
Typical tolerances listed on the chart below can be expected for production repeatability of all casting dimensions. Premium tolerances may require secondary operations that can impact cost and lead time.
Inches | ||
---|---|---|
Dimension | Normal | Premium |
0-0.20 | 0.010 | 0.003 |
0.20-0.40 | 0.010 | 0.003 |
0.40-1.00 | 0.010 | 0.003 |
1.00-2.00 | 0.016 | 0.013 |
2.00-3.00 | 0.024 | 0.020 |
3.00-4.00 | 0.031 | 0.028 |
4.00-5.00 | 0.043 | 0.035 |
5.00-6.00 | 0.055 | 0.043 |
6.00-7.00 | 0.067 | 0.051 |
7.00-8.00 | 0.079 | 0.059 |
8.00-10.00 | 0.098 | 0.071 |
Millimeters | ||
---|---|---|
Dimension | Normal | Premium |
0-5 | 0.25 | 0.07 |
5-10 | 0.25 | 0.14 |
10-25 | 0.25 | 0.25 |
25-50 | 0.40 | 0.32 |
50-75 | 0.60 | 0.50 |
75-100 | 0.80 | 0.70 |
100-125 | 1.10 | 0.90 |
125-150 | 1.40 | 1.10 |
150-175 | 1.70 | 1.30 |
175-200 | 2.00 | 1.50 |
200-250 | 2.50 | 1.80 |
Wall Thickness Tolerance – 0.01 ~ 0.015 (0.25mm ~ 0.375mm)
Angularity – 0.5° ~ 1°
Perpendicularity – 0. 008 / 1 (0.08mm / 10mm)
Surface Texture
125 RMS Max
115 AA Max
60 Wheelcraft Max
Dimension of Size
Max. Size 15 x 12 * 8 inch
Why Work With LIKE Machinery |Leading Manufacturing Design |Low Prices |Exceptional Quality |20 Year OEM experience|
No products were found matching your selection.