High Voltage Wire Clamp SS316 Cable Cleat (67-74mm OD), IEC61914 European Standard Single Trefoil cleats cable clamps parts For Electric Power Systems, Stainless steel trefoil and single cable cleats, Power Armoured Cable cleats for electrical installations， Fabrication sheet metal stamping OEM ODM, High Precision Die Metal Custom Welding Process assemblies parts China Supplier Manufacturer
High Voltage Wire Clamp SS316 Cable Cleat (67-74mm OD) cable cleat for cables between 67mm – 74mm diameter.
The SS316 Trefoil Cable Cleats 67-74 trefoil cleat is a high specification, extremely strong stainless steel cable cleat suitable to install trefoil single-core cables between 67mm – 74mm overall diameter.
The 316L stainless steel cleat features a Low Smoke Zero Halogen (LSZH) cable protecting liner and is LUL approved and used commonly throughout installations within demanding environments, such as the Petro-Chem industry.
SS316 Trefoil Cable Cleats 67-74 mm dimensions:
Cable outside diameter range: 67-74mm
Cleat width: 169mm
Cleat height: 158mm
Cleat depth: 54mm
Fixing centres: 75mm
Fixing holes: 2 x M10 or 1 x M12
Manufacturer OD Minimum OD Maximum
LIKE 67.0mm 74.0mm
Trefoil Cleats, Trefoil cable cleats – able to tightly contain multiple cables simultaneously, specifically single core cables laid in trefoil formation
Power systems with increased anticipated short circuit levels also expose installed cables to elevated temperatures (conductors can reach up to 250°C) – the high temperature leads to a softening of the cable insulation and outer cable sheath jacket exposing the cable to potential damage by the cleat. To counteract this cable cleats are available with polymeric liners. 316L Stainless Steel Trefoil Cable Clamp
Cable cleats are a vital component when installing cable. Due to the electrical current flowing through the cable, the cable must have cable clamps in place to ensure movement is restricted. Failure to correctly clamp the electrical cable could result in a break in the flow of electricity and even cause permanent damage. Cable cleats (or cable clamps) are recommended with every cable installation. IEC61914:2015 Standard Trefoil Electric Cable Cleat (63-70mm OD)
DR67-74 cable cleats are suitable for securing trefoil power cables between 67-74mm overall cable diameter offering rapid installation and the ultimate protection against the harshest environmental conditions and short circuit protection faults on medium/high voltage power cable and substation systems – note the cable cleats are not specified according to voltage but a range of application and installation factors calculated according to IEC61914.
The cable cleats are available in a range of sizes with range taking ability to suit cables in single way or trefoil formation.
Power cable system designers, engineers and specifiers must consider the correct cable fixing or securing system to provide safe and adequate restraint and protection of LV, MV or HV cables – cable cleats restrain movement of cables during electrical fault conditions. IEC61914 European Standard Single Trefoil Cable Cleat
Delivers Leak-proof connection
Easy to install
Excellent vacuum and pressure ratings
Interchangeable & re-tighten
High Corrosion resistance
Longer service life
Hassle free operations
Safe and trustworthy