IEC61914:2015 Standard Trefoil Electric Cable Cleat (63-70mm OD), European Standard Single Trefoil cleats cable clamps parts For Power Systems, Stainless steel trefoil and single cable cleats, Power Armoured Cable cleats for electrical installations， Fabrication sheet metal stamping OEM ODM, High Precision Die Metal Custom Welding Process assemblies parts China Supplier Manufacturer
IEC61914:2015 Standard Trefoil Electric Cable Cleat (63-70mm OD) cable cleat for cables between 63mm – 70mm diameter.
The SS316 Trefoil Cable Cleats 63-70 trefoil cleat is a high specification, extremely strong stainless steel cable cleat suitable to install trefoil single-core cables between 63mm – 70mm overall diameter.
The 316L stainless steel cleat features a Low Smoke Zero Halogen (LSZH) cable protecting liner and is LUL approved and used commonly throughout installations within demanding environments, such as the Petro-Chem industry.
SS316 Trefoil Cable Cleats 63-70 mm dimensions:
Cable outside diameter range: 63-70mm
Cleat width: 166mm
Cleat height: 151mm
Cleat depth: 54mm
Fixing centres: 75mm
Fixing holes: 2 x M10 or 1 x M12
LIKE 59.0mm 66.0mm
Trefoil Cleats, Trefoil cable cleats – able to tightly contain multiple cables simultaneously, specifically single core cables laid in trefoil formation
Power systems with increased anticipated short circuit levels also expose installed cables to elevated temperatures (conductors can reach up to 250°C) – the high temperature leads to a softening of the cable insulation and outer cable sheath jacket exposing the cable to potential damage by the cleat. To counteract this cable cleats are available with polymeric liners. 316L Stainless Steel Trefoil Cable Clamp
Cable cleats are a vital component when installing cable. Due to the electrical current flowing through the cable, the cable must have cable clamps in place to ensure movement is restricted. Failure to correctly clamp the electrical cable could result in a break in the flow of electricity and even cause permanent damage. Cable cleats (or cable clamps) are recommended with every cable installation.
Cable cleats are used to fix, clamp and support cables – cleats provide effective short circuit protection, support and retention to LV, MV and HV power cable systems when installed at intervals to circuits to secure electrical installations. IEC 61914 Stainless Steel Hinged Cable Cleat
The cable cleats provide restraint and prevent excessive cable movement resultant from fault-current magnetic forces – cleats must be suitably rated for cable size (outside diameter) and anticipated fault current (peak fault level kA).
Correctly specified cable cleats will withstand the forces corresponding to the values of the peak prospective short-circuit current. Stainless Steel Power Armoured Cable Cleats
Power cable system designers, engineers and specifiers must consider the correct cable fixing or securing system to provide safe and adequate restraint and protection of LV, MV or HV cables – cable cleats restrain movement of cables during electrical fault conditions. IEC61914 European Standard Single Trefoil Cable Cleat (59-66mm OD)
Delivers Leak-proof connection
Easy to install
Excellent vacuum and pressure ratings
Interchangeable & re-tighten
High Corrosion resistance
Longer service life
Hassle free operations
Safe and trustworthy